Trying to configure G25 wheel on W10

[icuk7]

Hi guys,

I'm having a couple of issues trying to set up an old G25 wheel to play a couple of racing games on Supermodel, in particular Sega Rally 2 as I want to see how it plays compared to real hardware as Sega Rally 2 had issues the last time I tried it a while back.

Windows 10
Logitech profiler v5.10/127

I'm almost there but have a couple of issues.

I'm unable to assign buttons in the Config setup using the G25 buttons, it doesn't register any presses at all. So, I used Logitech Profiler and assigned keystrokes to shift up/shift down/handbrake/view change and now those assigned button are OK. No idea how to assign keystrokes to the gear lever as I can't seem to see how to do that.

I calibrated pedals and they do work, but when I lift off the gas, the brake comes on. I tried selecting 'Report Combined Pedals' in Logitech Global Settings but when trying to calibrate it gives a calibration error.

It probably is a user error and nothing to do with Supermodel, but can someone help me sort this out? Is there a specific version of profiler and/or Supermodel that is known to work without any hassles?

Thanks.

[icuk7]

After a load of messing around I managed to sort it.

The issue was I was using PonMi version, and the PonMi version was not allowing any configurations from my wheel or keyboard to be set. Such a strange issue.

I simply downloaded the latest SVN version from the official website, and also downloaded the UI from: https://insertmorecoins.es/

I also downloaded Boomslangnz FFB app just to see what the difference with that was. And everything now works fine and I can configure pedals, gear shifter and all other buttons on the wheel. Happy days.

Seriously guys, I know I've said it before, but this emulator is so awesome.
There really should be a donate button somewhere so people can contribute towards the running of the site.

Thanks again.