I found a schematic diagram of the Model 3 Step 2 video board at
https://github.com/MisterTea/MAMEHub/bl ... s/model3.c:
which I will include at the bottom.
If I compare it to actual photos of a Model 3 Step 2 Video board, the schematic seems way larger and extended at the bottom.
For example, there's the usual half-circle of 4x Sega 315-6060 "Mars"-chips present, which you can see on the actual board.
But at the bottom of the schematic image, two more 315-6060s are listed.
Can anyone tell me what's going on there?
See the following screenshot:

Edit: I made it clearer in the picture what I mean.

I ask this because on the page segaretro.com , it lists the Model 3 board having 6 of those 315-6060 "Mars"-Rasterizer-processors without giving any source or merely, the sources they give do not confirm this.
Wanted to check if it is true or not, but all I could find was this schematical image of the board, which does not seem right.